Dynamic characteristics of marine soft clay under variable phase difference and initial static shear stress     

Wenqian Dong  Xiuqing Hu  Hongtao Fu 《Marine Georesources & Geotechnology》2020,38(7):770-785

Abstract

Under seismic loading, the soil layer is subjected to multidirectional cyclic shear stress with different amplitudes and frequencies because of the coupling of multiple shear waves and the soil element within a slope or behind a retaining wall is subjected to initial static shear stress before subjected to cyclic loading. Due to the complexity of seismic loading propagation, a phase difference exists between the initial static shear stress and cyclic shear stress. To investigate the influence of the phase difference and initial static shear stress on cyclic shear strain, cyclic modulus, and cyclic strength, a series of laboratory tests are performed on Wenzhou marine soft clay by multi-directional simple shear system, which can simulate the actual state better by controlling the horizontal cyclic stress in the x and y directions simultaneously. As the phase difference varies from 0° to 90°, the dynamic shear modulus increases and cyclic strain accumulation decreases with an increasing number of cycles. The shear strain increases with the initial shear stress.  相似文献   

Undrained monotonic shear behavior of marine soft clay after long-term cyclic loading     

Lin Guo  Hongxu Jin  Li Shi 《Marine Georesources & Geotechnology》2020,38(7):854-866

Abstract

In the coastal area, nearshore and offshore structures have been or will be built in marine soft clay deposits that have experienced long-term cyclic loads. Therefore, the mechanical behavior of marine clay after long-term cyclic loading needs to be investigated. In this research, a series of monotonic and cyclic triaxial tests were carried out to investigate the postcyclic mechanical behavior of the marine soft clay. The postcyclic water pore pressure, shear strength and secant stiffness are discussed by comparing the results with the standard monotonic test (without cyclic loading). It is very interesting that the postcyclic behavior of marine soft clay specimen is similar to the behavior of overconsolidated specimen, that is, the specimen shows apparent overconsolidation behavior after long-term cyclic loading. Then relationship between the overconsolidation ratio and the apparent overconsolidation ratio is established on the basis of the theory of equivalent overconsolidation. Finally, a validation formula is proposed which can predict the postcyclic undrained shear strength of marine soft clay.  相似文献   

海洋沉积物黏土矿物相对含量不同计算方法对比研究     

舒雨婷  刘志杰  余佳  孔敏  田先德  刘升发 《海洋通报》2019,(5):585-590

海洋沉积物黏土矿物相对含量计算存在多种计算方法,并不统一,限制了异源黏土矿物的整合和使用。文章选取了两种较为常见的计算方法,即Biscaye和国标中规定的计算方法,分别对东印度洋109个表层样品黏土矿物的相对百分含量进行计算,分析对比了两种方法计算结果之间的差异。结果显示,两种计算方法结果存在显著正相关,都能显示黏土矿物分布的变化趋势,4种黏土矿物相关系数由高到底分别为:蒙皂石0.986、伊利石0.974、绿泥石0.924、高岭石0.923。相对于Biscaye计算方法,国标计算方法会增加伊利石和高岭石的相对百分含量而降低蒙皂石和绿泥石的相对百分含量。两种计算方法黏土矿物的含量相关性较好,可以建立起相互数学转换关系式。但在不同的海区,由于矿物成因、结晶程度以及混层矿物的出现可能会使衍射峰形态发生改变,从而相关性系数和转换关系也会相应发生改变。  相似文献   

A finite element approach for predicting the full resistance profile of a spudcan deeply penetrating in dense sand overlying clay     

《Applied Ocean Research》2019

This paper presents a finite element approach to calculate the full resistance profile of a spudcan deeply penetrating in dense sand overlying clay, in which a potential for an installing spudcan to experience a sudden uncontrolled punch-through failure exists. A modified Mohr-Coulomb model characterized by incorporating a four-phase variation of the mobilized strength and dilation parameters with an equivalent accumulated plastic strain is developed and tested for the overlying dense silica sand. An extended Tresca model is used for the strain softening of the underlying clay. A series of large deformation finite-element (LDFE) analyses are carried out, varying the strength and dilation parameters as well as the spudcan geometries. A fairly good performance of the present approach is verified by validating against groups of centrifuge tests data, allowing the numerical study to be extended parametrically. The four-phase variation of the mobilized strength and dilation parameters involved in the progressive failure of the upper dense sand is parametrically studied and extended to cover the range of sand relative densities that are of practical interest. Additionally, comparisons with the typical existing LDFE analyses using both simple and sophisticated constitutive models are carried out. It shows that the present approach performs fairly well to calculate the full resistance profile of a spudcan deeply penetration in both thin and thick dense sand overlying clay, especially the peak and post-peak resistance, within around 5% of the corresponding centrifuge tests results.  相似文献   

Bound and mobile soil water isotope ratios are affected by soil texture and mineralogy,whereas extraction method influences their measurement     

Rachel E. Adams  Ayumi Hyodo  Toby SantaMaria  Cynthia L. Wright  Thomas W. Boutton  Jason B. West 《水文研究》2020,34(4):991-1003

Questions persist about interpreting isotope ratios of bound and mobile soil water pools, particularly relative to clay content and extraction conditions. Interactions between pools and resulting extracted water isotope composition are presumably related to soil texture, yet few studies have manipulated the bound pool to understand its influence on soil water processes. Using a series of drying and spiking experiments, we effectively labelled bound and mobile water pools in soils with varying clay content. Soils were first vacuum dried to remove residual water, which was then replaced with heavy isotope-enriched water prior to oven drying and spiking with heavy isotope-depleted water. Water was extracted via centrifugation or cryogenic vacuum distillation (at four temperatures) and analysed for oxygen and hydrogen isotope ratios via isotope ratio mass spectrometry. Water from centrifuged samples fell along a mixing line between the two added waters but was more enriched in heavy isotopes than the depleted label, demonstrating that despite oven drying, a residual pool remains and mixes with the mobile water. Soils with higher clay + silt content appeared to have a larger bound pool. Water from vacuum distillation samples have a significant temperature effect, with high temperature extractions yielding progressively more heavy isotope-enriched values, suggesting that Rayleigh fractionation occurred at low temperatures in the vacuum line. By distinctly labelling bound and mobile soil water pools, we detected interactions between the two that were dependent on soil texture. Although neither extraction method appeared to completely extract the combined bound and mobile (total water) pool, centrifugation and high temperature cryogenic vacuum distillations were comparable for both δ²H and δ¹⁸O of soil water isotope ratios.  相似文献   

Micromechanical approach to swelling behavior of capillary-porous media with coupled physics     

Mahdad Eghbalian  Mehdi Pouragha  Richard Wan 《国际地质力学数值与分析法杂志》2019,43(1):353-380

A detailed multiscale analysis is presented of the swelling phenomenon in unsaturated clay-rich materials in the linear regime through homogenization. Herein, the structural complexity of the material is formulated as a three-scale, triple porosity medium within which microstructural information is transmitted across the various scales, leading ultimately to an enriched stress-deformation relation at the macroscopic scale. As a side note, such derived relationship leads to a tensorial stress partitioning that is reminiscent of a Terzaghi-like effective stress measure. Otherwise, a major result that stands out from previous works is the explicit expression of swelling stress and capillary stress in terms of micromechanical interactions at the very fine scale down to the clay platelet level, along with capillary stress emerging due to interactions between fluid phases at the different scales, including surface tension, pore size, and morphology. More importantly, the swelling stress is correlated with the disjoining forces due to electrochemical effects of charged ions on clay minerals and van der Waals forces at the nanoscale. The resulting analytical expressions also elucidate the role of the various physics in the deformational behavior of clayey material. Finally, the capability of the proposed formulation in capturing salient behaviors of unsaturated expansive clays is illustrated through some numerical examples.  相似文献   

Calibration method affects the measured δ2H and δ18O in soil water by direct H2Oliquid–H2Ovapour equilibration with laser spectroscopy     

Hongxiu Wang  Bingcheng Si  Dyan Pratt  Han Li  Xiaojun Ma 《水文研究》2020,34(2):506-516

The direct H₂O_liquid–H₂O_vapour equilibration method utilizing laser spectroscopy (DVE-LS) is a way to measure soil pore water stable isotopes. Various equilibration times and calibration methods have been used in DVE-LS. Yet little is known about their effects on the accuracy of the obtained isotope values. The objective of this study was to evaluate how equilibration time and calibration methods affect the accuracy of DVE-LS. We did both spiking and field soil experiments. For the spiking experiment, we applied DVE-LS to four soils of different textures, each of which was subjected to five water contents and six equilibration times. For the field soil experiment, we applied three calibration methods for DVE-LS to two field soil profiles, and the results were compared with cryogenic vacuum distillation (CVD)-LS. Results showed that DVE-LS demonstrated higher δ²H and δ¹⁸O as equilibration time increased, but 12 to 24 hr could be used as optimal equilibration time. For field soil samples, DVE-LS with liquid waters as standards led to significantly higher δ²H and δ¹⁸O than CVD-LS, with root mean square error (RMSE) of 8.06‰ for δ²H and 0.98‰ for δ¹⁸O. Calibration with soil texture reduced RMSE to 3.53‰ and 0.72‰ for δ²H and δ¹⁸O, respectively. Further, calibration with both soil texture and water content decreased RMSE to 3.10‰ for δ²H and 0.73‰ for δ¹⁸O. Our findings conclude that the calibration method applied may affect the measured soil water isotope values from DVE-LS.  相似文献   

我国红黏土物理力学性能研究现状及展望     

邓绍云 《岩土工程技术》2020,(1):43-47

采用文献综述研究方法,梳理了红黏土研究成果并进行了评述,对红黏土的物理力学性质进行了归纳和总结,对红黏土的性能改良研究成果进行了汇总,指出红黏土的物理力学性能的差异性根源在于微观结构的个性差异存在,红黏土性能改良的困难在于红黏土的水敏性和热敏性,红黏土性能改良的关键在于控制其含水率。最后指出了研究不足在于普适性理论和知识体系没有构建,改良方法和技术探究应该加强,展望了红黏土性能改良的物理—化学—生物耦合作用的机理及复合技术开发和应用的研究。  相似文献   

Microstructure Evolution of Organic Matter and Clay Minerals in Shales with Increasing Thermal Maturity     

GU Yuantao  LI Xiaoxi  YANG Shuguang  WAN Quan 《《地质学报》英文版》2020,94(2):280-289

As the two important components of shale, organic matter(OM) and clay minerals are usually thought to strongly influence the hydrocarbon generation, enrichment and exploitation. The evolution process of OM and clay minerals as well as their interrelationship over a wide range of thermal maturities are not completely clear. Taking Yanchang(T_3y), Longmaxi(S_1l) and Niutitang(?_1n) shales as examples, we have studied the microstructure characteristics of OM and clay minerals in shales with different thermal maturities. The effects of clay minerals and OM on pores were reinforced through sedimentation experiments. Using a combination of field emission scanning electron microscopy(FESEM) and low-pressure N_2 adsorption, we investigated the microstructure differences among the three shales. The results showed that both OM and clay minerals have strong effects on pores, and small mesopore(2–20 nm) is the dominant pore component for all three samples. However, the differences between the three samples are embodied in the distribution of pore size and the location. For the T_3y shale, clay minerals are loosely arranged and develop large amounts of pores, and fine OM grains often fill in intergranular minerals or fractures. Widespread OM pores distribute irregularly in S_1l shale, and most of the pores are elliptical and nondirectional. The ?_1n shale is characterized by the preferred orientational OM-clay aggregates, and lots of pores in the composites are in the mesopore range, suggesting that over maturity lead to the collapse and compaction of pores under huge pressure of strata. The results of the current research imply that with increasing thermal maturity, OM pores are absent at low maturity(T_3y), are maximized at high maturity(S_1l) and are destroyed or compacted at over-mature stage(?_1n). Meanwhile, clay minerals have gone through mineral transformation and orientational evolution. The interaction of the two processes makes a significant difference to the microstructure evolution of OM and clay minerals in shale, and the findings provide scientific foundation in better understanding diagenetic evolution and hydrocarbon generation of shale.  相似文献   

蓟县中、新元古界的成岩作用——源于矿物学的数据     

王河锦  陈梦瑶  安佳丽  王冠玉  晏玉 《地质学报》2021,95(5):1469-1480

本文运用系列黏土矿物学和碳酸盐结构占位的方法研究了蓟县中、新元古界剖面出露的碎屑岩和碳酸盐岩.这些方法包括了伊利石结晶度、绿泥石结晶度、黏土矿物组合、粒度分布、多型、有序度、Mg/Ca离子占位以及地质温压计.结果表明:伊利石结晶度Kübler指数范围为0.37°～1.37°Δ2θ,绿泥石结晶度árkai指数范围为0.31°～2.40°Δ2θ,以及1Md的多型,一致指示本区处于晚期成岩作用影响范围,仅非常有限局部达到了初始变质的状态;黏土矿物组合主要是伊利石、伊蒙混层、绿蒙混层和高岭石;粒度分布范围为8～24 nm,其上界(23～24 nm)达到了NEWMOD计算的理论成岩带/近变质带界限,与结晶度数据一致,也表明了本区处于晚期成岩阶段.白云石有序度的数据表明,本区碳酸盐岩白云石的有序度值范围为0.19～0.99,可分为4个带:甚低级有序带、低级有序带、中级有序带、高级有序带.与川东石炭-二叠系碳酸盐岩相比,中低级有序带有一定的油气前景.本区由西向东,由甚低级有序带变化到高级有序带,白云石有序度升高.估计的成岩作用温度为183～200±20℃,压力为330 MPa,古地热梯度为17～21℃/km.  相似文献